Tel : 0086-021-60880117
Tel : 0086-021-60880117
SAE1050 steel is high strength carbon structural steel, after quenching with high strength and hardness, the steel machinability medium, cold deformation plasticity is low, poor weldability, heat treatment without temper brittleness, but the hardenability is low, the water critical diameter For the 13 * 30mm, and water quenching tendency to crack. This steel is usually normalized or quenched and tempered, or high-frequency surface hardening and other heat treatment after use.
SAE1050 steel can be hardened to HRC42 ~ 46. Therefore, if the need for surface hardness, and want to play the excellent mechanical properties of SAE1050 steel, often SAE1050 steel surface carburizing quenching, so you can get the required surface hardness.
SAE1050 carbon steel plate chemical composition
|
C
|
Si |
Mn |
P |
S |
|
0.47-0.55 |
0.17-0.37 |
0.50-0.80 |
≤0.030 |
≤0.050 |
SAE1050 carbon steel plate Mechanical properties
|
Tensile strength σ b (MPa)
|
Yield strength σ s (MPa) |
Elongation δ 5 (%) |
|
≥630 |
≥375 |
14 |
Delivery condition: Normalizing, tempering, normalizing + tempering, annealing
Size: 5-200mm thick, 1000-4000mm width, 1000-14000mm length
Royal supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to SAE1050 carbon steel plate.
Related Product:
SAE1020 carbon steel plates,cC8C0f557bb59007e15e2dc283d8428d,e7532896b0C8C42362f89b808d496746,SAE1035 carbon steel plates,SAE1040 carbon steel plates,SAE1045 carbon steel plates,SAE1055 carbon steel plates