Tel : 0086-021-60880117
Tel : 0086-021-60880117
SAE1025 steel is welding and cold strain plasticity, with a certain strength, hardness. Good ductility and toughness. Medium workability, hardenability and hardenability. Quenching and tempering after low-temperature strength and toughness. No temper brittleness tendency. Generally used in the manufacture of heavy and medium-sized machinery is not the load of cold stamping parts, small forgings and machining small parts such as washers, pins, bolts, nuts, etc .; for carburizing or carbonitriding after processing, , The piston pin and the gear is not important; After normalizing treatment, can be used as -20 ~ 475 ℃ pressure vessel forgings steel. Welding parts, hot forging, hot stamping parts for carburizing wear parts.
SAE1025 carbon steel plate chemical composition
|
C
|
Si |
Mn |
P |
S |
|
0.22-0.29 |
0.17-0.37 |
0.50-0.80 |
≤0.030 |
≤0.050 |
SAE1025 carbon steel plate Mechanical properties
|
Tensile strength σ b (MPa)
|
Yield strength σ s (MPa) |
Elongation δ 5 (%) |
|
≥450(46) |
≥275(28) |
23 |
Delivery condition: HR
Size: 5-200mm thick, 1000-4000mm width, 1000-14000mm length
Royal supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to SAE1025 carbon steel plate.
Related Product:
SAE1020 carbon steel plates,e7532896b0C8C42362f89b808d496746,SAE1035 carbon steel plates,SAE1040 carbon steel plates,SAE1045 carbon steel plates,SAE1050 carbon steel plates,SAE1055 carbon steel plates