Tel : 0086-021-60880117
SAE1030 steel is for hot forging and hot stamping of mechanical parts, cold drawing, heavy and general machinery with the shaft, drawbars, rings, and mechanical castings, such as cylinders, steam turbine frame, rolling mill frame and parts , Machine frame and flywheel.
Compared with mild steel, strength, hardness are high, with good toughness, weldability, most of this steel in normalizing the use of state, can also be quenched and tempered. Application: It is suitable for hot forging, hot pressing and cutting plus type method to manufacture parts with smaller cross section and less working temperature ≤150 ℃, such as screw rod, shaft key, ring, gear, Cutting performance is good, is widely used in automatic machine tool processing bolts, screws, etc .; also suitable for the manufacture of cold forging parts and welding parts; also used for carburizing, carbonitriding and other parts.
SAE1030 carbon steel plate chemical composition
C
|
Si |
Mn |
P |
S |
0.27-0.34 |
0.17-0.37 |
0.50-0.80 |
≤0.030 |
≤0.050 |
SAE1030 carbon steel plate Mechanical properties
Tensile strength σ b (MPa)
|
Yield strength σ s (MPa) |
Elongation δ 5 (%) |
≥490 |
≥295 |
21 |
Delivery condition: HR
Size: 5-200mm thick, 1000-4000mm width, 1000-14000mm length
Royal supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to SAE1030 carbon steel plate.
Related Product:
SAE1020 carbon steel plates,cC8C0f557bb59007e15e2dc283d8428d,SAE1035 carbon steel plates,SAE1040 carbon steel plates,SAE1045 carbon steel plates,SAE1050 carbon steel plates,SAE1055 carbon steel plates