Tel : 0086-021-60880117
Tel : 0086-021-60880117
SAE1045 steel has good comprehensive mechanical properties, widely used in motorcycles, cars, especially those in the alternating load of the work of the connecting rods, bolts, gears and shafts, etc., in the work to withstand the great friction, usually quenching the method to improve their own hardness, wear resistance and service life.
Shaft parts are one of the typical parts that are often encountered in machines. It is mainly used to support the transmission zero
Components, transmission torque and load. Shaft parts are rotating parts, its length is greater than the diameter, generally by the concentric shaft of the cylindrical surface, conical surface, the hole and the thread and the corresponding end face. According to different structural shapes, shaft parts can be divided into optical axis, step shaft, hollow shaft and crankshaft.
SAE1045 carbon steel plate chemical composition
|
C
|
Si |
Mn |
P |
S |
|
0.42-0.50 |
0.17-0.37 |
0.50-0.80 |
≤0.030 |
≤0.050 |
SAE1045 carbon steel plate Mechanical properties
|
Tensile strength σ b (MPa)
|
Yield strength σ s (MPa) |
Elongation δ 5 (%) |
|
≥600 |
≥355 |
16 |
Delivery condition: HR
Size: 5-200mm thick, 1000-4000mm width, 1000-14000mm length
Royal supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to SAE1045 carbon steel plate.
Related Product:
SAE1020 carbon steel plates,cC8C0f557bb59007e15e2dc283d8428d,e7532896b0C8C42362f89b808d496746,SAE1035 carbon steel plates,SAE1040 carbon steel plates,SAE1050 carbon steel plates,SAE1055 carbon steel plates