Product: Electrolytically zinc coated cold rolled steel flat products for cold forming.
Grade:
DC04+ZE, 1.0338+ZE
DC04+ZE steel quality: special deep drawing quality
DC04+ZE steel coating finish:
Skin passed condition or non skin passed condition
DC04+ZE steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface)
DC04+ZE steel Coil/strip/sheet Electrolytic zinc coatings
|
Coating designation |
Nominal zinc coating values for each surface A |
Nominal zinc coating values for each surface A |
|
Thickness um |
Mass g/m2 |
Thickness um |
Mass g/m2 |
|
ZE25/25 |
2.5 |
18 |
1.7 |
12 |
|
ZE50/50 |
5.0 |
36 |
4.1 |
29 |
|
ZE75/75 |
7.5 |
54 |
6.6 |
47 |
|
ZE100/100 |
10.0 |
72 |
9.1 |
65 |
DC04+ZE steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiled), CO(Chemical passivation and oiled), S ( Seales), P(Phosphated), PC(Phosphated and chemically treated) , PCO(Phosphated, Chemically treated and oiled) ,PO(Phosphated and oiled ) , U(As coated, Untreated)
DC04+ZE steel Coil/strip/sheet coating mass: ZE25/25, ZE50/50, ZE75/75, ZE100/100
EN10152
DC04+ZE steel suitable size: Thickness 0.35mm-3.0mm
DC04+ZE steel chemical composition
|
Grade |
Material No. |
C max |
P max |
S max |
Mn max |
Ti max |
|
DC04+ZE |
1.0338 |
0.08 |
0.030 |
0.030 |
0.40 |
- |
DC04+ZE steel Mechanical properties
|
Grade |
Material No. |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
R90 min |
N90
min |
|
DC04+ZE |
1.0338 |
220 max |
270-350 |
37 |
1.6 |
0.17 |
Royal industry have more than 2000 tons
DC04+ZE steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link:
DC01+ZE,
DC03+ZE,
DC05+ZE,
DC06+ZE,
DC07+ZE
