Product: Continuously hot-dip Zinc-aluminium alloy coating low carbon steels strip and sheet for cold forming
Grade:
DX56D+ZA
DX56D+ZA steel quality: Extra deep Drawing quality
DX56D+ZA steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
DX56D+ZA steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
DX56D+ZA steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
DX56D+ZA steel Coil/strip/sheet coating mass:
ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
DX56D+ZA steel Coil/strip/sheet coating:
Hot dip zinc-aluminium alloy coating (ZA)
application of a zinc-aluminium coating by immersing the prepared products in a molten bath which is composed of zinc and approximately 5% aluminium
EN10327
DX56D+ZA,
DX56D+AZ steel suitable size: Thickness 0.35mm-3.0mm
DX56D+ZA steel chemical composition
|
Grade |
Material No. |
C max |
Si max |
Mn max |
P max |
S max |
Ti max |
|
DX56D+ZA |
1.0322 |
0.12 |
0.50 |
0.60 |
0.10 |
0.045 |
0.30 |
DX56D+ZA steel Mechanical properties
|
Grade |
Material No. |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
R90 min |
N90
min |
|
DX56D+ZA |
1.0322 |
120-180 |
260-350 |
39 |
1.9 |
0.21 |
Royal industry have more than 2000 tons
DX56D+ZA steel ,
DX56D+AZ steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link:
DX51D+ZA/AZ,
DX52D+ZA/AZ,
DX53D+ZA/AZ,
DX54D+ZA/AZ,
DX57D+ZA
