Tel : 0086-021-60880117
Tel : 0086-021-60880117
Product: Continuously hot-dip Zinc-aluminium alloy coating low carbon steels strip and sheet for cold forming
Grade: DX57D+ZA
DX57D+ZA steel quality: Super deep Drawing quality
DX57D+ZA steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
DX57D+ZA steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
DX57D+ZA steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
DX57D+ZA steel Coil/strip/sheet coating mass:
ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
DX57D+ZA steel Coil/strip/sheet coating:
Hot dip zinc-aluminium alloy coating (ZA)
Application of a zinc-aluminium coating by immersing the prepared products in a molten bath which is composed of zinc and approximately 5% aluminium
EN10327 DX57D+ZA,DX57D+AZ steel suitable size: Thickness 0.35mm-3.0mm
DX57D+ZA steel chemical composition
| Grade | Material No. | C max | Si max | Mn max | P max | S max | Ti max |
| DX57D+ZA | 1.0853 | 0.12 | 0.50 | 0.60 | 0.10 | 0.045 | 0.30 |
| Grade | Material No. | Yield Strength MPa | Tensile strength MPa | Elongation A80 min | R90 min |
N90 min |
|
| DX57D+ZA | 1.0853 | 120-170 | 260-350 | 41 | 2.1 | 0.22 | |
Royal industry have more than 2000 tons DX57D+ZA steel ,DX57D+AZ steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link: DX51D+ZA/AZ, DX52D+ZA/AZ, DX53D+ZA/AZ, DX54D+ZA/AZ, DX56D+ZA