Product: Continuously hot-dip Zinc-aluminium/Aluminium -zinc alloy coating low carbon steels strip and sheet for cold forming
Grade:
DX53D+ZA,
DX53D+AZ
DX53D+ZA,
DX53D+AZ steel quality: deep Drawing quality
DX53D+ZA,
DX53D+AZ steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
DX53D+ZA,
DX53D+AZ steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
DX53D+ZA,
DX53D+AZ steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
DX53D+ZA,
DX53D+AZ steel Coil/strip/sheet coating mass:
ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
AZ100, AZ150, AZ185
DX53D+ZA,
DX53D+AZ steel Coil/strip/sheet coating:
Hot dip zinc-aluminium alloy coating (ZA)
application of a zinc-aluminium coating by immersing the prepared products in a molten bath which is composed of zinc and approximately 5% aluminium
Hot dip aluminium-zinc alloy coating (AZ)
application of a aluminium-zinc coating by immersing the prepared products in a molten bath which is composed of 55% aluminium, 1.6% Silicon and the balance zinc.
EN10327
DX53D+ZA,
DX53D+AZ steel suitable size: Thickness 0.35mm-3.0mm
DX53D+ZA steel ,
DX53D+AZ steel chemical composition
|
Grade |
Material No. |
C max |
Si max |
Mn max |
P max |
S max |
Ti max |
DX53D+ZA
DX53D+AZ |
1.0355 |
0.12 |
0.50 |
0.60 |
0.10 |
0.045 |
0.30 |
DX53D+ZA steel ,
DX53D+AZ steel Mechanical properties
|
Grade |
Material No. |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
R90 min |
N90
min |
DX53D+ZA
DX53D+AZ |
1.0355 |
140-260 |
270-380 |
30 |
- |
- |
Royal industry have more than 2000 tons
DX53D+ZA steel ,
DX53D+AZ steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link:
DX51D+ZA/AZ,
DX52D+ZA/AZ,
DX54D+ZA/AZ,
DX56D+ZA,
DX57D+ZA
