Tel : 0086-021-60880117
Tel : 0086-021-60880117
Product: Continuously hot-dip Zinc-aluminium/Aluminium -zinc alloy coating high yield strength steels strip and sheet for cold forming
Grade: HX260LAD+ZA,HX260LAD+AZ
HX260LAD+ZA,HX260LAD+AZ steel quality: Low alloy/micro-alloyed steel(LA)
HX260LAD+ZA,HX260LAD+AZ steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
HX260LAD+ZA,HX260LAD+AZ steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
HX260LAD+ZA,HX260LAD+AZ steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
HX260LAD+ZA,HX260LAD+AZ steel Coil/strip/sheet coating mass:
ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
AZ100, AZ150, AZ185
HX260LAD+ZA,HX260LAD+AZ steel Coil/strip/sheet coating:
Hot dip zinc-aluminium alloy coating (ZA)
application of a zinc-aluminium coating by immersing the prepared products in a molten bath which is composed of zinc and approximately 5% aluminium
Hot dip aluminium-zinc alloy coating (AZ)
application of a aluminium-zinc coating by immersing the prepared products in a molten bath which is composed of 55% aluminium, 1.6% Silicon and the balance zinc.
EN10292 HX260LAD+ZA,HX260LAD+AZ steel suitable size: Thickness 0.35mm-3.0mm
HX260LAD+ZA steel ,HX260LAD+AZ steel chemical composition
| Grade | Material No. | C max | Si max | Mn max | P max | S max | Al min | Ti max | Nb max |
|
HX260LAD(H260LAD)+ZA HX260LAD(H260LAD)+AZ |
1.0929 | 0.12 | 0.50 | 0.60 | 0.30 | 0.025 | 0.015 | 0.12 | 0.09 |
HX260LAD+ZA steel ,HX260LAD+AZ steel Mechanical properties
| Grade | Material No. | R90 min |
N90 min |
Yield Strength MPa | Tensile strength MPa | Elongation A80 min | Bake-Hardenning-Index BH2 MPa min |
|
HX260LAD(H260LAD)+ZA HX260LAD(H260LAD)+AZ |
1.0929 | - | - | 260-330 | 350-430 | 26 | - |
Royal industry have more than 2000 tons HX260LAD+ZA steel ,HX260LAD+AZ steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link: HX180BD+ZA/AZ, HX180YD+ZA/AZ, HX220BD+ZA/AZ, HX220YD+ZA/AZ, HX260BD+ZA/AZ, HX260LAD+ZA/AZ, HX300YD+ZA/AZ, HX300BD+ZA/AZ, HX300LAD+ZA/AZ, HX340LAD+ZA/AZ, HX380LAD+ZA/AZ, HX420LAD+ZA/AZ