Tel : 0086-021-60880117
SWRH52A high carbon steel wire rods
SWRH52A high carbon steel wire rods is in the Japanese Industrial Standard JIS G3506:2004 .The steel wire rod JIS G3506 shall be classified into 21 grades . Royal offer such grades like : SWRH27,SWRH32,SWRH37,SWRH42A,SWRH42B,SWRH47A,SWRH47B,SWRH52A,SWRH52B,SWRH57A,SWRH57B,SWRH62A,SWRH62B,SWRH67A,SWRH67B,SWRH72A,SWRH72B,SWRH77A,SWRH77B,SWRH82A,SWRH82B.
Standard : JIS G3506:2004
Grade : SWRH52A
Brand : Royal
Size of wire diameter : 5.5-13mm
SWRH52A high carbon steel wire rods chemical composition (%) :
Grade |
C |
Si |
Mn |
S |
P |
0.49-0.56 |
0.15-0.35 |
0.30-0.60 |
0.030 max |
0.030 max |
Remarks : Carbon content may be specified so as ti be within the range narrowed by 0.01% each from the upper and the lower limits given in the above table,when agreed upon between the purchaser and manufacturer .
1b74435c9063889c0C15C381413a50a6 standard diameter :
standard diameter (mm) |
||||||||||
5.5 |
6 |
6.4 |
7 |
8 |
9 |
9.5 |
10 |
11 |
12 |
13 |
SWRH52A hard draw steel wire tolerance on diameter and out-of-round of the wire rod :
Tolerance (mm) |
out-of-round (mm) |
±0.40 |
0.64 max |
Note : out-of-round is the difference between the maximum and minimum values of diameter on the same cross-section of the wire rod.
JIS G3506 SWRH52A is used for the manufacture of hard draw steel wire,oil tempered steel wires,hard drawn steel wires for prestressed concrete,galvanized steel wire strands,wire ropes,etc.
Related Link:SWRH27,SWRH32,SWRH37,SWRH42A,SWRH47A,SWRH57A,SWRH62A,SWRH67A,b10de698f72b63e0b28B2ca7fb8b4b1a,SWRH77A,SWRH82A,