Tel : 0086-021-60880117
Tel : 0086-021-60880117
SWRH32 high carbon steel wire rods
SWRH32 high carbon steel wire rods is in the Japanese Industrial Standard JIS G3506:2004 .The steel wire rod JIS G3506 shall be classified into 21 grades . Royal offer such grades like : SWRH27,SWRH32,SWRH37,SWRH42A,SWRH42B,SWRH47A,SWRH47B,SWRH52A,SWRH52B,SWRH57A,SWRH57B,SWRH62A,SWRH62B,SWRH67A,SWRH67B,SWRH72A,SWRH72B,SWRH77A,SWRH77B,SWRH82A,SWRH82B.
Standard : JIS G3506:2004
Grade : SWRH32
Brand : Royal
Size of wire diameter : 5.5-13mm
SWRH32 high carbon steel wire rods chemical composition (%) :
Grade |
C |
Si |
Mn |
S |
P |
|
0.29-0.36 |
0.15-0.35 |
0.30-0.60 |
0.030 max |
0.030 max |
Remarks : Carbon content may be specified so as ti be within the range narrowed by 0.01% each from the upper and the lower limits given in the above table,when agreed upon between the purchaser and manufacturer .
ffc115b7024c3d013C4C3b4e876c88df standard diameter :
standard diameter (mm) |
||||||||||
|
5.5 |
6 |
6.4 |
7 |
8 |
9 |
9.5 |
10 |
11 |
12 |
13 |
SWRH32 hard draw steel wire tolerance on diameter and out-of-round of the wire rod :
|
Tolerance (mm) |
out-of-round (mm) |
|
±0.40 |
0.64 max |
Note : out-of-round is the difference between the maximum and minimum values of diameter on the same cross-section of the wire rod.
JIS G3506 SWRH32 is used for the manufacture of hard draw steel wire,oil tempered steel wires,hard drawn steel wires for prestressed concrete,galvanized steel wire strands,wire ropes,etc.
Related Link:SWRH27,SWRH37,SWRH42A,SWRH47A,SWRH52A,SWRH57A,SWRH62A,SWRH67A,b10de698f72b63e0b28B2ca7fb8b4b1a,SWRH77A,SWRH82A,SWRH42B,SWRH47B,SWRH52B,SWRH57B,SWRH62B,SWRH67B,54b02e9df1d940640301870ea2f4C4Ca,SWRH77B,SWRH82B