Tel : 0086-021-60880117
S355M steel is a kind of TMCP( Thermo Mechanical Control Process) rolled weldable fine grain structural steels. The delivery condition for S355M must be TMCP rolled way with Low temperature impact test. M means -20 min degree impact test. ML means -50 min degree impact test.
EN 10025 S355M steel plate have the good weldable and fine grain structural property. So, it can be used into the steel structural or welded vessel or pressure vessels. At the same time, S355M also can be used in the offshore or any other applications which request the high tensile strength.
Standard : EN 10025-4
Dimension range : 2-150mm * 1000-3800mm * 3000-18000mm
S355M structural steel plate Mechanical Properties
Mechanical Properties
|
||||||
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
Degree |
Min Value |
|||||
S355M |
mm |
Min Mpa |
Mpa |
Min % |
-20℃ |
J |
5≤t≤16 |
355 |
470-630 |
22% |
40 |
||
63<t≤100 |
325 |
440-600 |
40 |
|||
100<t≤120 |
320 |
430-590 |
40 |
|||
Note: Impact energy for impact test is on longitudinal |
S355M TMCP steel plate/sheet Chemical Composition
Chemical Composition
|
|||||||
Grade |
The Element Max (%) |
||||||
C |
Si |
Mn |
P |
S |
N |
Al |
|
S355M |
0.16 |
0.55 |
1.70 |
0.035 |
0.030 |
0.017 |
0.015 |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
0.35 |
0.60 |
0.13 |
0.06 |
0.55 |
0.06 |
0.12 |
Carbon Equivalent: CEV= 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
Thickness, mm
|
Max CEV based on the ladle analysis |
5≤t≤40 |
0.39% |
40<t≤63 |
0.40% |
63<t≤150 |
0.45% |
Delivery Status : Hot rolling, controlled rolling, normalizing and so on
S355M Low alloy high strength steel application :
S355M steel plate for the manufacture of building bridges, railway vehicles, high-pressure vessel boiler, tractor, large steel structure and large-scale military engineering and other structural parts.
Related Product: