Tel : 0086-021-60880117
Tel : 0086-021-60880117
EN 10025 S235JR steel material can be produced into S235JR steel sheet, S235JR steel plate ,S235JR steel pipe , S235JR steel sheet bar and S235JR profile steel.
S235JR steel is a kind of common carbon steel material.EN 10025 S235JR steel grade usually used into the industries like Construction, crane, equipment , Crusher machine and so on.
Standard : EN10025-2
Dimension range :5-600mm*1500-4200mm*5800-16000mm
S235JR steel plate/sheet Mechanical properties
|
Mechanical properties
|
|||||||
|
Yield Strength (Min Mpa) |
Tensile Strength (Mpa) |
Impacting Test |
|||||
|
t≤16 |
16 |
40 |
100 |
100 |
100 |
degree |
J |
|
235 |
225 |
215 |
195 |
360-510 |
350-500 |
20 |
27 |
S235JR chemical composition
|
chemical composition
|
||||||
|
C max |
Si |
Mn max |
P max |
S max |
N max |
Cu max |
|
0.23 |
- |
1.50 |
0.045 |
0.045 |
0.014 |
0.60 |
Testing, Z15-Z35 thickness direction of performance requirements, high strength and high toughness requirements such as steel that
Delivery Status : Hot rolling, controlled rolling, normalizing, etc.
S235JR steel plate application :
S235JR steel has good plasticity, toughness, weldability, cold stamping properties and a certain strength, good cold bending performance. Low temperature performance is not very good (impact test is 20 ℃). Widely used in general requirements of the parts and welded structural parts. Such as the rods, connecting rods, pins, shafts, screws, nuts, ferrules, brackets, frames, building structures, bridges, etc.
Related Product: