Tel : 0086-021-60880117
BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional, tank, building, bridge, machine.
Standard: BS EN10025-2
Dimension range : 5-600mm*1500-4200mm*5800-16000mm
EN10025-2 S235J2 Mild steel sheet Mechanical properties :
Mechanical properties
|
||||||||||||||||||
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 -150 |
150 - 200 |
250-400 |
||||||||||
Yield strength Min(MPa) |
235 |
225 |
215 |
410 |
215 |
225 |
195 |
175 |
||||||||||
Nominal thickness (mm) |
To 3 |
3-100 |
100-150 |
150-250 |
250-400 |
|||||||||||||
Tensile strength (MPa) |
360-510 |
360-510 |
360-510 |
350-500 |
- |
|||||||||||||
Nominal thickness (mm) |
To 1 |
1-1.5 |
1.5-2 |
2-2.5 |
2.5-3 |
|||||||||||||
Minimum elongation Lo = 5,65 √ So (%) |
15 |
16 |
17 |
18 |
19 |
Testing, Z15-Z35 thickness direction of performance requirements, high strength and high toughness requirements such as steel that
EN10025-2 S235J2 Carbon steel plate Chemical composition (%) :
chemical composition
|
|||||||||||
Grade |
Material No. |
Killed or not |
C ≤ |
Si ≤ |
Mn≤ |
P≤ |
S≤ |
N≤ |
Cu≤ |
||
Thickness (mm) |
|||||||||||
≤16 |
>16~ 40 |
>40 |
|||||||||
S235J2 |
1.0117 |
killed |
0.17 |
0.17 |
0.17 |
- |
1.40 |
0.025 |
0.025 |
- |
0.55 |
Delivery Status : Hot rolling, controlled rolling, normalizing, etc.
EN10025-2 S235J2 steel sheet application :
S235J2 steel has good plasticity, toughness, weldability, cold stamping properties and a certain strength, good cold bending performance. Low temperature performance is not very good (impact test is -20 ℃). Widely used in general requirements of the parts and welded structural parts. Such as the rods, connecting rods, pins, shafts, screws, nuts, ferrules, brackets, frames, building structures, bridges, etc.
Related Product: