Tel : 0086-021-60880117
Tel : 0086-021-60880117
SA285 Grade A is a kind of common carbon steel, whose tensile is low or mid-low. There are three grades or levels material GR A/B/C in the standard ASME SA-285/SA-285M. Plates ordered to this specification SA285 Grade A are normally in the as-rolled condition. SA285 Grade A may be ordered from the supplier as normalized or stress relieved if so desired.The alloy SA285 Grade A is not heat treated for hardening.
SA285 Grade A is a kind of common carbon steel used for pressure vessel steel.SA285 Grade A is supplied throughout the oil gas and petrochemical industry.The material SA285 Grade A has good forming and welding characteristics under conventional methods.
Standard: ASME SA-285/SA-285M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
SA285 Grade A steel plate Mechanical Properties :
|
Mechanical Properties
|
||||||
|
Grade |
Thickness |
Yield |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
|
Degree |
Min Value |
|||||
|
SA285 Gr.A |
mm |
Min Mpa |
Mpa |
Min % |
- |
J |
|
5≤t≤150 |
165 |
310-450 |
27% |
- |
||
|
Note: Impact energy for impact test is on longitudinal |
||||||
SA285 Grade A Boiler steel plate Chemical Composition :
|
Chemical Composition
|
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
N |
Al |
|
|
SA285 Gr.A |
0.17 |
0.08-0.45 |
0.98 |
0.035 |
0.035 |
- |
- |
Delivery Status : Normalizing + tempering or tempering state
SA285 Grade A pressure vessel steel application :
ASME SA285 Grade A steel is widely used in petroleum, chemical, power station, boiler and other industries, for the manufacture of reactor, heat exchanger, separator, spherical tank, paint tank, Oil gas cylinders, high-pressure water pipe hydropower stations, water turbines and other equipment and components.
Related Product: