Product: Continuously hot-dip zinc coated Cold rolled steels coil, strip , sheet, plate for general use
Grade:
SGCD1
SGCD1 steel quality: Deep drawing type 1
SGCD1 steel coating finish:
R (Normal spangle), Z (Minimized spangle)
SGCD1 steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
SGCD1 steel Coil/strip/sheet surface treatment:
C (Chromate treatment),NC(Non Chromate treatment), O (oiling), X (unoiling) NP(Phosphating treatment of non chromate), P(Phosphated), M(Untreated)
SGCD1 steel Coil/strip/sheet coating mass:
Pure Zinc coating: Z06 (60g), Z08(80g), Z10(100g), Z12(120g),Z14(140g),Z18(180g), Z20(200g), Z22(220g), Z25(250g), Z27(270g), Z35(350g), Z37(370g), Z45(450g), Z60(450g)
Alloy Zinc+Fe: F04(40g), F06(60g), F08(80g), F10(10g0), F12(120g), F18(180g)
SGCD1 steel Coil/strip/sheet coating: Z ( Pure Zinc), F( Z+Fe alloy)
JIS G 3302
SGCD1 steel suitable size: Thickness 0.40mm-2.3mm
SGCD1 steel chemical composition % :
|
Grade |
C max |
Mn max |
P max |
S max |
|
SGCD1 |
0.12 |
0.60 |
0.04 |
0.04 |
SGCD1 steel steel Mechanical properties
|
Grade |
Yield Strength MPa |
Tensile strength MPa |
Elongation % min |
|
0.25-≤0.40mm |
0.40-≤0.60mm |
0.60-≤1.0mm |
1.0-≤1.6mm |
1.6-≤2.5mm |
Above 2.5mm |
|
SGCD1 |
- |
270 min |
- |
34 |
36 |
37 |
38 |
- |
Royal industry have more than 2000 tons
SGCD1 steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Reference Link:
SGCH,
SGCH,
SGCD2,
SGCD3,
SGCD4,
SGC340,
SGC400,
SGC440,
SGC490,
SGC570
